equipmentSubtitle
Станция CityAir
Основа для создания поста оперативного контроля загрязнения воздуха
Преимущества
станций CityAir
Compact size
Any vertical surface is suitable for the installation of the station: a wall of the building, a lamp post, a cellular communication tower
Work in a wide range of climatic conditions
Станции обеспечивают высокое качество измерений при температуре от -40°С до +50°С и в любых метеоусловиях: во время осадков, тумана, сильного ветра и т.д.
Built-in battery
The station can operate autonomously while maintaining full functionality for at least 24 hours
Operation and transmission of measurement results in real time
Каждую минуту станции автоматически отправляют на сервер результаты измерений
CityAir Monitoring Post
The modular design allows building a monitoring post with the individual set of sensors
CityAir Hub allows to connect any required number of expansion modules, both its own and made by third-party manufacturers
CityAir Monitoring Post Measurements
Посты экологического контроля предназначены для измерения содержания в атмосферном воздухе типичных для городов загрязнителей (взвешенные частицы и характерные газы), а также для определения основных метеорологических параметров
Оборудование является утвержденным типом средств измерения. Номер в госреестре 75984-19, 78092-20, 88474-23
Произведено в Российской Федерации
Download detailed specifications
CityAir Station
PM2.5, PM10, temperature, humidity, atmospheric pressure
Газоанализатор Модуль G1
CO, NO2, O3
Газоанализатор Модуль G2
SO2, H2S
Газоанализатор Модуль G3
6 вариантов исполнения
NH3, CH2O, CH4, C6H6O
Исполнение
Определяемый компонент
G3.A-01
NO2
O3
CO
NO
-
-
-
-
-
G3.A-02
NO2
O3
CO
NO
H2S
SO2
-
-
-
G3.A-03
NO2
O3
CO
NO
-
-
NH3
CH2O
-
G3.A-04
NO2
O3
CO
NO
-
-
-
CH2O
CH4
G3.A-05
NO2
O3
CO
NO
-
-
NH3
-
CH4
G3.A-06
NO2
O3
CO
-
-
-
NH3
CH2O
CH4
Module “Weather Station”
Temperature, relative humidity, pressure, air flow speed and direction
Список измеряемых параметров может быть расширен за счет модулей сторонних производителей.
Quality of Measurements
CityAir stations are comparable in accuracy to the equipment of traditional monitoring posts
Modern developments in the field of sensors and non-trivial engineering solutions are used for CityAir equipment.
The results of regular parallel tests show that it provides accuracy comparable to standard equipment, which means that CityAir equipment can effectively complement existing monitoring networks.
Collocated experiment at a station of the state monitoring network
CityAir Station at the traditional monitoring post
CityAir Station
Patent applications: PCT/RU2018/050059, RU2018134839
CityAir Monitoring Station
Specifications
Specifications
Station configuration
1.
GSM antenna
2.
Ducts for air sampling
3.
Mounting system
4.
Temperature, humidity and pressure sensor (in the sunshield)
5.
Power cable
6.
GPS antenna
7.
ON/OFF button
8.
Ethernet connector
9.
Connector for the extension modules’ cable
10.
Service connector
Operating conditions
Temperature
from -40°C to +50°C
Humidity
from 0 to 98%
Environmental parameters
smog, rain, snow, frost, dust, wind, direct sunlight
Service interval
12 months
Data transmission
Data transmission channels
GSM (GPRS)
Wi-Fi
Ethernet
Data transfer to server
up to once per minute (customizable)
Non-volatile storage capacity
40000 records
remote management
via web interface
self check
automatic
Dimensions and power specifications
Dimensions
160×320×465 mm
Weight
10 kg
Station Protection Degree
IP56
Power network characteristics
100—240V, 50/60Hz
Resistance to voltage drops
from 80 to 400 V
Autonomous fully functional operation
at least 24 hrs
* Vandal-proof grille manufacturing is possible
Extension modules
The station can be used as a hub for extension modules: it serves as a power source and transfers data from the modules to the server.
External devices are connected via the RS-485 interface using the Modbus communication protocol.
External devices are connected via the RS-485 interface using the Modbus communication protocol.
